SHOP AROUND - FIND THE BEST PRICE - CALL US- WE'LL BEAT IT!
TOLL FREE NR: 1 877 832-9235
PEARL 18 KILN
Chamber Volume: 1.59 Cu Ft.
NEMA PLUG 620-P
TEMP: 1700 deg. F
The Pearl-18 is packed with exciting features. The top lifts away to give access to the shelf area from three sides. Air pistons assist in lifting the top. You can place the Pearl on a table without an extra stand.
“You can compose directly on the kiln shelf, then close the kiln top,” said glass artist Judith Conway, who uses the Pearl-18 in her Washington, DC studio. “There is no need to balance and carry a heavy kiln shelf from your work table over to your kiln, trying to load the shelf in the kiln while not disturbing the glass pieces in your design.”
The elements in the top are mounted in pinless element grooves. Since the groove opening is narrower than the element coil, the elements stay in place without pins.
Electrical components are mounted inside the base of the kilns. The Pearl-18 uses the digital 3-key Sentry Xpress controller.
The reliable Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.
The Pearl-18 Furniture Kit
Glass must be fired on a ceramic shelf; never directly on the kiln firing chamber bottom.
1 - C-19 - 17” x 17” Shelf
4 - 1” wide Square Posts, ½” long
1 lb. Bag Glass Separator