IF YOU FIND A BETTER PRICE - CALL US- WE'LL BEAT IT!
TOLL FREE NR: 1 877 832-9235
Chamber Volume: 0.39 Cu Ft.
Heats to 2000ºF
120 volt, 600 watt
Uses 5-15R receptacle
The digital SC-1 kiln fires PMC, Art Clay Silver, decals, china paint, and glass up to 2000°F. The SC-1 is smaller than the SC-2 and therefore very convenient as a traveling kiln. Take the SC-1 to seminars and set it up in just minutes. .
The SC-1 fires automatically at the rate and temperature you enter. A large, brightly lit display prompts for firing rate, temperature and hold time. Use the hold feature to automatically soak any type of PMC and Art Clay Silver to their recommended times.
The high-tech ceramic fiber firing chamber is wrapped in a steel inner case. The outer steel case remains cool due to the layer of air between it and the inner case. In addition, the case is slotted for air circulation. Electrical components, located in the base, stay cool even during long hold times.
The fast-firing element is embedded in the firing chamber shell. Each SC-1 includes a 1/4” thick ceramic fiber shelf.
On/off safety switch
Built-in base; no extra stand needed
Door opens 180 degrees for easy loading
The case is slotted for air circulation
Electrical components in the base stay cool even at extended hold times
Includes a 1/4” thick ceramic fiber shelf
The SC-1 uses the same reliable Sentry Xpress 3-key controller and electrical components found on our larger SC-series kilns. The controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.
Inside measurements: 20" x 4.5" x 9" deep
Electrical: 120 volts, 14 amps
Construction: Firebrick Roof, Walls, and Floor,
1" thick Ceramic Fiber Doors,
Weight 86 lbs