SHOP AROUND - FIND THE BEST PRICE - CALL US- WE'LL BEAT IT!
TOLL FREE NR: 1 877 832-9235
The Janus-1613 Glass/Pottery Kiln
16 1/2" - 8 sided , 13 1/4" deep
Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets in clay or glass. Make treasured gifts. When you own a Paragon kiln, you can experiment with new ideas to your heart’s content.
The new Paragon Janus-1613 can fire both pottery and glass. Heating elements are mounted in the top and sidewalls.
Select between glass and pottery with the flip of a switch. With the switch in glass mode, heat comes from the top elements and the middle sidewall element. With the switch in pottery mode, heat comes from only the sidewall elements.
In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10. You can also fire several shelves of smaller glass pieces using the pottery mode.
The elements in the lid are mounted in a firebrick “ball” groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently, evenly radiating heat onto the glass.
The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life.
Will you anneal glass for long periods in your Janus-1613? Then you should order the mercury relay upgrade. The mercury relays found on our large industrial kilns outlast mechanical relays. The life of the quiet, reliable mercury relay has been measured in millions of on/off cycles. Please call for a price on the mercury relay upgrade.
A heavy galvanized steel base covers the reversible brick bottom completely. It folds up under the stainless case on all sides to strengthen the firing chamber. This is one more assurance that your Paragon kiln is built to last.
A kiln stand is included at no extra charge. The stand is complete with mar-proof plastic feet.
The Janus-1613 control box is finished in a durable high temperature, water-base blue paint. We chose water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.
Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns. Elements are coiled from the finest high-temperature wire available.
A large, tapered peephole offers a wide view of the firing chamber with little heat loss. The peephole, both sides of the lid and top rim of sidewall firebrick are hardened and sealed with a special refractory coating to protect the ware from dust.
The digital Sentry 2.0 includes two modes: Cone-Fire with programmed slow cooling and 18-Segment Ramp-Hold. It is manufactured by the Orton Ceramic Foundation exclusively for Paragon.
You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.
The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.
Glass/pottery selection switch
3” insulating refractory firebrick walls
All elements in dropped, recessed brick grooves are easy to replace
Tapered peepholes for a wide view
A steel floor pan supports the entire brick bottom of each kiln
One year limited warranty
Weight: 172 lbs
Available in 240, 200, 208, or 380 volt, 50 or 60 hertz, single or 3 phase. (Our kilns are priced for 240 volt version)
Janus-24 and Janus-27: easy-access control box with folding support arm
Since the Janus-1613 is designed for porcelain, it also easily fires ceramics, china paint, decals, gold and, of course, glass
OPTIONAL: Furniture Kit
Furniture Kit for Janus-1613, S-1613-3, TnF-1613-3
2 - C-18 (15” Round x 5/8”) Shelves, 1- C-18 1/2 Shelf
1" Square Posts, 3 each - ”, 1”, 2”, 3”, 4”, 6”
1 lb. Bag Kiln Wash
Furniture Kit Shipping Weight: 28 lbs.