Home My Account Shopping Cart (0)


$177.00 - $2,291.00
Call/Email For Pricing
SHIPPING: CALL 1-877 832-9235


TOLL FREE NR: 1 877 832-9235


Paragon Iguana

The Iguana is powered with reliable extra heavy-duty elements. This results in long element life, because the elements do not “struggle” to reach high temperatures. 10,800 watts heat the 18” wide, 18” deep, 22 ½” high interior to a full cone 10.


Easy Installation

The 240 volt Iguana plugs into a standard 6-50R outlet, so you can fire it on the outlet most studio kilns already use.


Easy to Load

The Iguana is easy on the back muscles. With the optional 22” stand, the interior floor height is a comfortable 34 ½”.


Industrial-gauge elements are seated and protected in dropped, recessed firebrick grooves. The elements are easy to replace, because you can comfortably reach into the kiln.


Potters and ceramists who struggle with top-loading kilns will enjoy the Iguana. The door swings open wide on a heavy ½” steel rod with sealed bearings. A spring-loaded latch presses the door tightly closed. A recessed firebrick lip around the door seals in heat.


The Sentry digital controller is manufactured by Orton Ceramic Foundation. It is unsurpassed in reliability for a controller in its price range. It includes a programmed cool-down, Cone-Fire and Ramp-Hold modes, and is capable of accepting types K, R, or S thermocouples. A type-K thermocouple with an Inconel® sheath comes standard. We also recommend the optional Type-S for stoneware and porcelain.


For your peace of mind, the Iguana includes a safety switch that shuts off power to the controller when not in use.


The ventilated switch box is generously louvered for air circulation for the long life of the electrical components. Yet dust is kept to a minimum.


Iguana Features

Saves electricity with 3” firebricks

Cone 10, 2350°F

Type-K thermocouple with ¼” sheath, or optional type-S

Sentry 2.0 controller with programmed cool-down

Two tapered peepholes in the side give a wide view of the interior with little heat loss

Available in 200, 208, 220, 240, 480 volts, 1 & 3 phase

Proportional power elements for more even heating

Heavy-gauge steel completely covers the bottom under the firebricks for extra strength

1 1/2" air gap between the switch box and kiln; electrical components stay cool and last longer

Built in fuse protects the controller

Four hand lifts

Weight: 483 lbs



OPTIONAL: Furniture Kit

Iguana Furniture Kit

3 C-17 full shelves (16” x 14” x 5/8”)

1 C-17H half shelf (8” x 14” x 5/8”)

1” wide square posts, 4 each in lengths of ½”, 1”, 2”, 3”, 4”, 5”, 6”

1 lb. bag kiln wash

Furniture Shipping Weight: 50 lb.