SHOP AROUND - FIND THE BEST PRICE - CALL US- WE'LL BEAT IT!
TOLL FREE NR: 1 877 832-9235
Chamber Volume: 2.4 Cu Ft.
NEMA PLUG 6-20R
TEMP: 1700 deg. F
Create breathtaking glass in the deluxe GL-18ADTSD Professional Series glass kiln. The GL-18ADTSD is proudly made in America by skilled workers and is designed for those whose livelihood depends on glass production. The kiln includes features not found on competitive kilns.
The GL-18ADTSD digital kiln fires from the top, three sides, and door for unsurpassed heat distribution. Use the kiln’s side heat for taller projects such as drop-out vases sagged through a ring mold. Side elements, seated in dropped, recessed brick grooves, span the three walls.
The kiln uses advanced power ratio technology, pioneered by Paragon, to balance the heat between top and side/door elements. Program the digital controller to balance the heat between the top and sides in increments of 10%. (i.e., 100% top - 0% sides, 50% top - 50% sides, 80% top – 20% sides, etc.) Set the heat balance for any combination desired between the top and sides so that the total heat output equals 100%. Imagine the precise control you will have in adjusting the kiln to slump glass or to improve heat distribution over large fused panels.
The GL-18ADTSD digital kiln is 13” high inside with room to bend glass for curved windows or cabinet doors and to repair lampshades. Make glass-fused platters. Crack the door to rake or emboss designs in the glass. Make small-to-medium sized castings and pâte de verre.
Paragon’s GL-series are made for years of rigorous firing, as artists all over America can attest. The insulating firebrick, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling. A double heat shield and air gap between the kiln and ventilated switch box help keep electrical components cool for long, trouble-free service. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life.
The GL-series lid elements use an element groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins.
The spring-pressure latch and a ½" recess around the edge of the firebrick door keep the door tightly closed. The door remains rock-steady on a heavy hinge shaft. Four hand lifts aid moving. The base is open in the back and slotted to dissipate heat.
Watch the red-hot glass through two tapered peepholes, drilled one above the other in the wall opposite the switch box. Peephole plugs are included.
Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. Make treasured gifts. When you own a Paragon kiln, you can experiment with new glass ideas to your heart’s content.
You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.
Paragon’s innovative controller will help you achieve consistent results from one firing to the next. The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.
Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire.
The GL-18ADTSD has a durable high temperature, water-base finish. We use water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.
Optional Ceramic Fiber Top
The standard GL-series kiln comes with an insulating firebrick top, grooved for heating elements. The upgrade option is a ceramic fiber top with element grooves. The fiber top helps keep the glass clean during firing.
Optional Kiln Stand
The heavy-duty GL-series stand raises your GL-18, GL-22 or GL-24 kiln to a convenient working height. Begin operating your new kiln without having to find a table strong enough to support over 300 pounds. The table is 147 pounds of rock solid construction.
ST-8: without casters—30 ¼” square x 28 ¼” high, 147 lb.
ST-8-1: with 2" steel casters—30 ¼" square x 30 ¾” high, 150 lb.
Furniture Kit for GL-18 Series
Glass must always be fired on a shelf and never directly on the kiln’s firebrick bottom.
1 - C-17 - 16” x 14” Shelf
4 - 1” wide Square Posts, ½” long
1 lb. Bag Glass Separator
NOTE: THIS KILN IS ALSO AVAILABLE WITH ELEMENTS ONLY IN THE LID