IF YOU FIND A BETTER PRICE - CALL US- WE'LL BEAT IT!
TOLL FREE NR: 1 877 832-9235
FUSION 14 KILN
Chamber Volume: 0.73 Cu Ft.
Heats to 1700 deg. F.
Uses 5-15R receptacle
120 volt, 1800 watt
Paragon’s square Fusion-14 digital glass kiln operates on a standard household outlet and fires up to nine 4” x 4” glass tiles. Imagine the murals you could make with this kiln.
Fire small glass bowls, pendants, earrings, cufflinks, and even bracelets. Try out the newest glass techniques. Enjoy glittering dichroic glass. Make gifts that your loved ones will treasure. When you own a Paragon kiln, you can experiment with glass fusing to your heart’s content.
The Fusion-14 heats from the top for even heat distribution across the glass surface. The lid elements are mounted in pinless element grooves. Because the element coils are wider than the groove opening, element pins are no longer needed. This helps eliminate dust in the firing chamber.
You can even anneal glass beads with your Fusion-14. Order the optional bead door, which mounts to the front of the kiln. Use your kiln to safely cool large, ornate beads through the annealing range.
The reliable Fusion-14 has dual mechanical relays for long life. The digital controller sends a signal to the relays to turn on the heating elements. The two relays in the Fusion-14 last longer than the single relay of competitive kilns because of the reduced amperage going through each relay.
For your convenience, flip the switch on the front panel to turn off power to the controller when the kiln is not in use. The large, comfortable wooden lid handle stays cool.
The Fusion-14 control box has a durable high temperature, water-base finish. We chose water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.
The Ease of Digital Firing
You will be amazed at the convenience of digital firing. The reliable solid-state Sentry Xpress controller continually monitors the firing so you do not need to closely watch the kiln. (Please remember, however, to check the kiln occasionally during firing and to monitor it near the expected shutoff time.)
The reliable Sentry Xpress 3-key controller includes two modes: Single Speed and 8-segment Ramp-Hold. Control both heating and cooling with simple 3-key operation.
The Fusion-14 Furniture Kit
Glass must be fired on a ceramic shelf; never directly on the kiln firing chamber bottom.
1 - 12” x 13” x 5/8” Shelf
4 - 1” wide Square Posts, ½” long
1 lb. Bag Glass Separator
Weight: 105 lbs
Optional Ceramic Fiber Top
Optional Glass Window and Bead Door