ITEM - BuffBL
|
The BL buffer has a manual speed control.
The high torque 1/6 hp motor runs on ball
bearings, 1800 - 7000 rpm. It is 5 1/2" high
and 13" wide and weighs 7.5 lbs. This powerful, variable
speed machine is compact
to fit most home benches. It comes with
two spindles to hold buff wheel up to 4", the
suggested size. |
List $196
Sale $160
|
ITEM 5050GB
|
CORK AND FELT GLASS POLISHER
A high quality glass polisher for prepolish
with pumice and final polish with Cerium
Oxide. 10" x 2" cork and felt wheels are
installed, dressed and tested for balance
at the factory. The felt wheel is installed with
metal side supports. Wheels turn at slow
420 rpm to minimize polish powder loss.
Rim speed of 1100 SFM creates the friction
necessary for a brilliant mirror finish. This
is a professional machine for exacting glass
artists.
Size 24"L x 23"W x 18"H - Shipping weight - 70 lbs.
|
List
$1335
Sale $1250
|
Item 465WBS
|
Wet Belt Sander & Muslin Buffer
This combination wet belt sander and Muslin
buff polisher has all the features of the larger
unit below (C466) plus a polish arbor that
mounts a 6" muslin buff. It comes complete
with a 1/3 hp, 110v motor and belt guard
mounted on Lam-I Cushion base.
Ready to plug in and operate.
Size 25"L x 13"W x 18"H Shipping weight - 45 lbs.
See belts available three rows down.
|
List $625
Sale $551
|
ITEM 466WBS
|
GLASS WET BELT SANDER
Using a 600 grit Silicon Carbide 3" x 24"
belt, you can take that bad edge off any
piece of glass and leave it shiny. For high
polishing, use a felt belt with Cerium Oxide
and get a mirror finish.
Comes with 1/3 hp, 110v motor and belt
guard mounted on Lami-I-Cushion base
ready to plug in and operate. Water valve
and spray nozzle is built in for easy hookup.
Use a pressure feed jar for portable operation. Just
fill the jar, pump the handle a few times
and your ready to go. Unit sits on top of
machine and connects to nipple shown.
Or connect directly to a water source.
Both methods allow control of water flow rate.
Size 25"L x 13"W x 19"H. Shipping weight - 45 lbs.
See belts and polishing materials
two rows down.
(Note: Same type as C760 pictured below,
only shorter sanding belt)
Item PT200
- Pressure feed jar - Price $23.00
|
List $535
Sale $499
|
Item 760 WBS
|
This wet belt sander is designed for
production type work.
3" x 41 1/2" size belts provide for greater surface cutting and
extended belt life. Comes with 4" high back plate. Same water
system as the smaller mounted sander. Comes complete with 1/3 HP,
110v motor and belt guard mounted on Lam-1-Cushion base ready to plug
in and operate. Motor now shipped separately.
See belts and polishing materials
one row down.
Item HBP013-Optional
13" High Back Plate-Price$47.25
|
List
$746.25
Sale
$668.00
|
Item 4012
|
A very versatile glass lathe. This
lathe will accommodate upto 10" wheels and gives the operator ample
toom with it's 36" shaft.
Glass Lathe features:
- Heavy duty Turned Ground and Polished 1" shaft
- 3 Quick Adjustable Speeds 635,805, &1100
RPM
- 2 Very Open, Un-mounted CSP541 Powder Coated Splash
Pans and Hoods
- Heavy Duty Sealed Ball Bearings are Greased For Life
- 1 HP, 110v, 60 hz motor. *Available in 220v, 50 hz.
shipped freight collect.
|
List
$1250.00
Sale
$1175.00
|
Belts, Wheels and Polishing
Compounds
Grits for the Silicon carbide belts:
60, 80, 100, 220, 320, 400, or 600
The 220 is the standard blade on the polishers when ordered
|
Item BL24G
Single 3"x24" Silicon Carbide Belt
Item BL24G10 Ten 3" x 24" Silicon Carbide
Belts
Item BL:24C Single 3"x24" Cork
Belt
Item BL24F Single 3"x24"
Felt Belt
Item BL41G Single 3" x 41 1/2"
Silicon Carbide Belt
Item BL41G10 Ten 3" x 41 1/2" Silicon
Carbide Belts
Item BL41C Single 3"x41 1/2"
Cork Belt
Item BL41F Single 3"x
41 1/2" Felt Belt
Item CCW102 10" x 2" Cork Wheel
Item CFW102 10" x 2" Felt Wheel
Item Cerox 1 lb
of Cerium Oxide Polishing
Compound
Item Cerox4 5 lb of Cerium
Oxide Polishing
Compound
|
$3.25
$28.00
$7.35
$25.50
$5.65
$45.00
$16.28
$35.50
$189.00
$201.60
$11.55
$52.00
|
Note:
Cerium Oxide is an extremely fine polishing compound. With it you can
put a mirror finish on any glass or
gem product. You can use it with an ordinary buffing
cloth, but, of course, using a felted belt sander or buffing wheel will
make the job much easier
|
