POWER TOWER COMBO WELDER

COMBINATION TAC, SPOT, FUSION AND PULSE ARC WELDER

THE POWER TOWER

THE ULTIMATE PULSE ARC WELDING MACHINE

What Is Pulse Arc Welding?
Pulse arc welding is an instantaneous 1 to 5 millisecond burst of high energy released from
a storage system in order to create a weld arc to join metal alloys together. This pulse arc
welder mimics a laser welder in that it utilizes a directed high energy arc of light to create the
very high temperature required to weld metals. Several pulse arcs may be required to complete
the weld joint between the two mating surfaces and the automatic pulse position (3 per second)
does the job nicely.

It also acts in single pulse mode, automatic mode, as a tack welder, a spot welder
and a fusion welder - and welding is always stronger than soldering.

If you are a jewler, you can weld prongs on a rings without removing the stone. The heat is so
fast, that the stone never gets hot. If you do metal work with gages from 30 to 12, this
machine will make your projects faster and stronger, costing you less time and money.

This is truly one machine that can multi-task.

Welds all alloys

Silver-Platinum-Gold-Brass-Copper-Titanium-Steel-Mokume Gane- Stainless & more

Safe

This machine is safe. You can hold the parts with your hand and not get burned or shocked.

Can be set for single or automatic pulses.

Single pulse for one weld joint. Pulse arc mode gives 3 welds per second for quickly doing seams.

Easy to use with no previous experience

Foot control and special attachments make Arc, Spot, Tack and Fusing welding easy

Has variable power and adjustable pulse lengths.

5 levels of energy and you can select 4 different pulse lengths. Infinitely variable dc voltage 12 to 90 volts

And works on your home voltage.

AC Input - 100/115 or 208-220 volt single phase 50-60 Hz

AND HERE IS WHAT COMES WITH YOUR MACHINE

Head shield with special eye protection lenses.	Ring jig for welding inside or outside of rings.	Foot switch for safe and quick firing in pulse or tack mode
Weld pencil with 5 sizes of ceramic tips with extra tips n package.	Contact ground pad with carbon overlay for best results.	Extra products include: fusion pencil, single and double tweezer grounds, alligator and copper plate grounds, spot weld pencil and ring repair ground.
Weld pencil stand.	A complete set of manuals and operating instructions.	Argon regulator for those who will be doing titanium. Note: The argon regulator is only needed for titanium.
TACK WELD SPOT WELD PULSE ARC WELD FUSION WELD	THE FINEST COMBINATION TAC AND PULSE ARC WELDER *ON THE MARKET*	WELD JUMP RINGS WELD JEWELRY PRONGS WELD BROKEN RINGS WELD NEW LINKS FILL VOIDS IN METALS

You no longer have to figure out a jig to hold your project while you solder it: just tac weld it together and then solder. To make a jump ring necklace, just use the pulse arc to weld the jump rings together - it's stronger than a solder joint. Or shorten a link bracelet and fix a prong on a broken ring without removing the stone. You save time and don't risk damage to the stone. Whether you need to weld wire to wire, sheet to sheet or wire to sheet, this machine can do it all. Make designs in metal you would never have tackled before because now you can weld the items together into a creative design to fit your imagination.

With the Power Tower Pulse Arc Welder you are ready to do any job better.

ITEM # ABI POWER TOWER $4560

Remember: Find a lower price and we'll beat it!

PARTS & ACCESORIES