THE MINI PULSE ARC WELDER| The Laser Alternative - This
pulse arc welder provides a serious alternative to laser welding at far less
cost. It will not only speed up the soldering process, but in many cases eliminate it. It requires no maintenance and no operator training. And because it only leaves a small carbon residue that easily cleans up, it eliminates the need for pickling and polishing. And for those who don't even want that you can get an argon gas connection. You can repair (or insert) proings without removing stones. You can weld any metal precious or non-precious. You can repair box clasps without annealing the metal. Place a jump ring (or chain link) on the contact pad, put the pencil near and step on the foot switch. You have a soldered connection, much stronger that solder. Lay wires next to each other and welding them into intricate designs. And it comes in three different configurations. Package I Includes: weld pencil, 3 different size weld tips with 2 sizes of electrodes, contact pad, carbon overlay, brass jaw pliers assembly, tweezers assembly, cross lock tweezers assembly, alligator clip assembly, foot switch, weld pencil stand, argon gas regulator and opti-saver instant darkening flash shield. OUR PRICE $ 2625 Package II is minus the: argon gas regulator, weld pencil stand and opti-saver flash shield. OUR PRICE $ 2390 Package III is minus the: gas guage or gas regulator on the unit, any gas connection or plumbing, weld pencil stand and opti-saver flash shield and less one weld tip. (A good option if you don't use gas.) OUR PRICE $ 1720 |