Home My Account Shopping Cart (0)
Menu

12" x 12" DEEP FRONT LOAD KILN

$1,135.00
CALL FOR FREIGHT QUOTE
SKU: O-1210FLE

 

1210FLE

Availability: 12-13 weeks from receipt of order
Pricing with 3 Key controller
 
 Quick Overview

Model - 1210FLE 120 volt built with guillotine lift and punty door, inside dimensions: 12" wide x 12" deep x 10" high, fires to 1700°F


The 1210FLE is a compact portable front loader designed with fiber walls and floor.  The lid element is set securely in the top of the kiln eliminating the fear of a mandrel hitting an electrical part. Easy accessibility is possible with guillotine door lift and lower punty door, which flips down for annealing pieces.  Fiber walls will smoke and produce some odor on the initial firing which will dissipate after the first firing.  The first firing is recommended to do outdoors or open all doors and windows in the room where the kiln is located.  Odors are not toxic and future firings will not be affected.

Model comes equipped with pilot light, attached stand, stainless steel jacket, and Bartlett 3 Key electronic controller. Data is entered by scrolling through the up and down arrows for the desired ramp/hold programming, 


Upgrade to the 12 key digital Bartlett V6-CF or RTC-1000 controller for more ramp-hold user programs and multiple features including delay start, preheat, cone offset, skip step and many more for precise firings every time. Messages and Information are available for reviewing a firing profile before or during the firing, viewing the current segment the firing is in, and cone table for easy look up of temperature and cone number equivalents. Other options include quartz viewing window, Type S thermocouple, castors, vent and much more!

Furniture Kit is included for this Front Loading electric model.  It provides 2-3  layers of shelving,  assorted posts, and a one pound bag of kiln wash. Choose the standard furniture kit or build your own with shelves and posts the quantities required

1210FLE opened with punty door closed

 

Model 1210FLE Wiring Specifications
Equipped with Lid Lift Assist N/A 120 Volts
Inside Chamber Dimensions w x d x h (inches) 12 x 12 x 10 15 Amps
Cubic Feet .83 1800 Watts
Outside Dimensions with Stand or Frame w x d x h (inches) 17 x 18.5 x 23 20 Amp Breaker Required
Brick Thickness Fiber Walls Plug Configuration: NEMA 5-15
Maximum Temperature 1700°F/927°C Copper Wire Size: #12,#10 if circuit is longer than 40 ft
Est Ship Wt 135 lbs

 

UA-68984994-1